The Stages Of Installing A Septic Tank

 The installation of a septic tank is intended for homes not connected to the public wastewater collection network. It must be carried out in accordance with the standards in force. To ensure its proper functioning, make sure that the septic tank installation Amarillo tx is done by a professional. Indeed, installing a septic tank requires complex work. Find the details in this article.

What is a septic tank used for?

Residences located outside the city are not connected to the city's sewer systems. In this case, they are forced to invest in an septic tank installation Amarillo tx. Indeed, the septic tanks serve as accommodation for wastewater. Septic tanks treat these so that they are not released into nature. All wastewater for domestic use is concerned such as:

• Toilet waters,

• Water from sinks,

• Washbasin water,

• Bath water, etc.

During the sanitation process, it is liquids that are taken into account . As for solids, they must be emptied regularly .

How to install a septic tank?

The installation of a septic tank is subject to strict regulations. You will definitely need the services of a professional, as heavy earthworks may be required. There are a few steps to follow to set up a septic tank.

Choose the location of the septic tank

The location of a septic tank requires compliance with certain conditions, namely:

• A distance of at least 5 m between the installation and the home ,

• A distance of at least 3 m from the property lines ,

• A distance of at least 3 m between the pit and any tree or shrub ,

• There should be at least 35 m between the pit and a well, a source or a catchment of drinking water for consumption .

• The pit must be located outside the passage or vehicle parking area .

Choosing the right septic tank

To make the right choice for an all-water tank, you have to take into account the standards to be respected , namely:

The capacity of the septic tank  : this varies according to the area of ​​the accommodation and the number of occupants. It takes about 3m for a 5 room housing and add 1m to each additional main room.

The material of the Amarillo tx septic tank installation: this can be steel, fiberglass, cement, concrete or plastic. Usually, the bottom of the pit is concrete or reinforced concrete and the walls are cement or brick.

The steps to install a septic tank

To carry out this type of work in due form, the following steps must be followed:

• Dig a hole with a dimension larger than that of the pit itself.

• Place a 10 cm bed of sand at the bottom of the hole.

• Place the pit in the hole so that the outlet level is higher than the spreading .

• Dig the trenches for the drains and for the drains.

• Place the pipes and drains on a 2-inch bed of sand.

• Protect the pit from pebbles by pouring sand around it.

• Connect the black water outlet.

• Install a grease trap.

• Install a ventilation system.

• Cover everything with earth.

The different types of septic tanks

There are generally two types of septic tanks, including conventional septic tanks and all-water tanks . Classic pits are old models that are still found in some homes, but none are used today for new construction.

Currently, the old models are replaced by all-water pits. These guarantee the pre-treatment function of a house's wastewater. In other words, gray water or gray water from the kitchen and bathrooms as well as the black water from the toilets.

You now know the steps of installing a septic tank Amarillo tx. If you have decided to install one at home, it is recommended that you call in a professional.