The Choice Of Location To Septic Tank Installation Amarillo TX

 When you are going to septic tank installation Amarillo tx, now called an all-water tank, you must comply with strict regulations. You will also need the intervention of a professional installer to carry out the work according to the rules of the art.

The septic tank as we know it traditionally is no longer authorized in France. Currently, this term is used to designate the all water tank (FTE) which, conversely, can treat all of the wastewater in a home.

Here is how your service provider will proceed with the installation of your septic tank.

Installation work on your device should not be taken lightly. Indeed, there are strict rules regarding its location:

• The FTE must be located at least 5 m from your home,

• It must be at least 3 m from property lines, trees, and shrubs,

• The FTE must also be installed at least 35 m from wells or sources intended for human consumption,

• The device must be located outside areas used for parking or vehicular traffic.

• It is important to note that there should be no planting above the installation, except sod.

Setting up the system

So that your sanitation is not oversized or undersized, it is important to define its size (volume).

As an indication, it must be able to treat around 500 liters per inhabitant or 3000 liters for a family of 6 people.

The installer will dig a hole according to its size and then make the formwork. To do this, he makes sure that the pit never comes into contact with the walls. The bottom of the hole should also be perfectly flat.

A bed of sand 10 to 15 cm thick or a concrete footing will be put in place, depending on the constraints of the land. Then, the service provider septic tank installation Amarillo tx will install the FTE in the center of the formwork, while ensuring that the sector is sufficiently ventilated.

Backfill

This is part of the setup, but it should be considered separately. The reason? You cannot do this without the agreement of your SPANC (the non-collective public sanitation service). In reality, this service must, first of all, carry out a check of the good completion of the installation.

This being done, your specialist will:

• Backfill the contours of the FTE using a sandy material capable of absorbing pressure differences and soil movements,

• Fill the pit with water so that it is not crushed by the pressure.

• Place the pipes with a certain slope (2 to 4%) between the device and your home.

• Install the manholes at ground level, making sure that they are perfectly watertight.

• To conclude, remember that an incorrectly installed system will not be able to function properly, which is prohibited by law. It can also cause certain inconveniences such as foul odors that will escape from it. Finally, its maintenance will cost you dearly. So remember to trust a certified craftsman to guarantee its installation.